|
Project 2009-11
Interpretation
− IRO-010-1,
R1.2 and R3
− Reliability Coordinator Data Specification and
Collection by WECC Reliability Coordination
Subcommittee
Related Files
Status:
A request for
an interpretation of IRO-010-1,
Requirement R1.2 and R3 has been submitted by the WECC Reliability
Coordination Subcommittee. The ballot pool approved the standards
revisions. The revised standards will be submitted to the NERC Board of
Trustees for adoption.
Summary:
The request asks to clarify the following:
-
Does the phrase, “as specified” in Requirement R3 reference the
documented data and information specification in IRO-010-1
Requirement R1, or is the data and information in Requirement R3
“any” data and information that the Reliability Coordinator might
request?
-
Is the intent of Requirement R3 to have each responsible entity
provide its own data and information to its Reliability Coordinator,
or is the intent to have responsible entities provide aggregated
data (collected and compiled from other entities at the direction of
the Reliability Coordinator) to the Reliability Coordinator?
-
Under Requirement R1.2, what actions (on the part of the Reliability
Coordinator) are expected to support the “mutually acceptable
format” for submission of data and information?
Interpretation Process:
In accordance with the Reliability Standards
Development Procedure, the interpretation must be posted for a 30-day
pre-ballot review, and then balloted.
There is no public comment period for an interpretation.
Balloting will be conducted following the same method used for
balloting standards.
If the interpretation is approved by its ballot pool, then the
interpretation will be appended to the standard and will become
effective when adopted by the NERC Board of Trustees and approved by the
applicable regulatory authorities. The interpretation will remain
appended to the standard until the standard is revised through the
normal standards development process.
When the standard is revised, the clarifications provided by the
interpretation will be incorporated into the revised standard.
|
